产品目录

产品信息 »  产品目录  » 电动执行器/电缸  » 控制器/驱动器

控制器/驱动器

无需编程的控制器(带行程记忆功能) LECP2

    ・类似气缸的端至端控制。
    ・两端及中间共12点定位。
型号系列对应电机电源电压并联输入输出
输入点数
并联输入输出
输出点数
定位
模式
点数
无需编程型
(带行程记忆功能)
LECP2步进电机
(带编码器DC24V)
DC24V ±10%6点
(光耦合绝缘)
6点
(光耦合绝缘)
短点2点
中间12点

产品特点

■Compact, Low Profile

Table height: 28mm (For LEMC/H/HT, size 25)
Table height reduced by using belt drive and offset guide.

■Guide mechanism can be selected.
■Selectable controllability (Controller)
  • End to end operation similar to an air cylinder (12 intermediate stop positions)
  • Easy position setting using numerical inputs
  • Mounting interchangeable with the conventional E-MY series
  • Can be connected to various types of guide. (Series LEMB)
  • Easy maintenance (Series LEMC/H/HT)

The drive unit and the guide unit are separable.

  • Motor Placement: Mounting position of the motor is user selectable and can either be on the top, bottom, left, or right of the actuator.
  • Solid state auto switch can be mounted for checking the limit and intermediate signal.
■Application Examples
■Programless Type (With Stroke Study) Series LECP2

Stroke end operation similar to an air cylinder is possible.

■Programless Type Series LECP1

No Programming

Capable of setting up an electric actuator operation without using a PC or teaching box.

■Step Data Input Type Series LECP6

Simple Setting to Use Straight Away

●Easy Mode for Simple Setting

If you want to use it right away, select "Easy Mode."


●Normal Mode for Detailed Setting

Select normal mode when detailed setting is required.

  • Step data can be set in detail.
  • Signals and terminal status can be monitored.
  • Parameters can be set.
  • JOG and constant rate movement, return to origin, test operation and testing of forced output can be performed.
■Series Variations

Go Top