Product Information »
WEB Catalog
» Air Cylinders
» Table Cylinders
Table Cylinders
Compact Slide MXH2
![](https://www.smcworld.com/upfiles/etc/series/en-jp/MXH2.jpg)
-
・Size ø25 have been added.
Same width as size ø20
Allowable moment: Max. 1.4 times greater than that of size ø20
・Improved linear guide rigidity reduces the amount of table displacement
by 48%
Displacement due to a force acting in the pitch direction: 48% reduction
(0.31 mm→0.16 mm)
Displacement due to a force acting in the yaw direction: 63% reduction
(0.24 mm→0.09 mm)
Displacement due to a force acting in the roll direction: 90% reduction
(0.06 mm→0.006 mm)
・Max. standard stroke: 150 mm (For ø20, ø25)
・Weight: Max. 6% reduction (194 g→182 g)
・Dimensions for mounting and length are equivalent to the existing MXH
series.
Safety Instructions Actuators/Precautions
Auto Switches/Precautions Model Selection/Technical Data Green Procurement (RoHS)
Auto Switches/Precautions Model Selection/Technical Data Green Procurement (RoHS)
Type | Series | Action | Bore size (mm) |
---|---|---|---|
Standard | MXH2 | Double acting | 6,10,16,20,25 |
Features
Improved linear guide rigidity
![](/assets/newproducts/en-jp/mxh2/images/01-r.jpg)
High Rigidity Achieved
Increased rigidity by extending the guide length of the linear guide.
Significantly reduced table displacement when a moment is applied.
![](/assets/newproducts/en-jp/mxh2/images/02.jpg)
Weight: Max. 6% reduction (194 g → 182 g)
![](/assets/newproducts/en-jp/mxh2/images/03.jpg)
Max. standard stroke length has increased. (Max. 150 mm)
(Existing product: Max. 60 mm)
![](/assets/newproducts/en-jp/mxh2/images/04-r.jpg)
Piping is possible in 3 directions.
If changing the port location, “Made to Order” model (-XC3 □ ) is available.
![](/assets/newproducts/en-jp/mxh2/images/05.jpg)
Bumper
A bumper is also installed inside the cylinder.
![](/assets/newproducts/en-jp/mxh2/images/06.jpg)
Mounting is possible in 4 directions.
![](/assets/newproducts/en-jp/mxh2/images/07.jpg)
2 mounting options for workpieces are available.
![](/assets/newproducts/en-jp/mxh2/images/08.jpg)
Dimensions for mounting and length are equivalent to the existing MXH series.
Dimensions including workpiece mounting dimensions and cylinder mounting dimensions are the same as the existing model.
Variations
![](/assets/newproducts/en-jp/mxh2/images/09-r.jpg)