-
New Products
Product Information »
New Products Category
|Vacuum Equipment
Bernoulli Gripper
ø20
ZNC20-X1 Updated Sep-21
ø20
ZNC20-X1 Updated Sep-21
- Body size ø20 has been added.
- For the adsorption transfer of thin cloths, films, printed circuit boards, etc.
- 3 types of body materials: Aluminum, Resin, Stainless steel
- Attachments
With stopper: Prevents workpiece slippage
With vibration suppression cover: Suppresses the vibration noise of thin workpiecess
Vacuum Manifold for Fieldbus System
ZKJ Series Updated Aug-21
ZKJ Series Updated Aug-21
- Fieldbus-compatible
Requires no input/output unit. Space saving
Reduced wiring time
Compatible protocol: PROFINET - Energy saving ejector: Air consumption reduced by 90%
- Supply valve: N.O. specification
Can hold vacuum even when the power goes out or is turned off (Supposing the supply pressure is being maintained)
Prevents the sudden dropping of workpieces (Supposing the supply pressure is being maintained) - IP65: Dust-tight/Water-jet-proof
Vacuum Gripper
for Collaborative Robots ZXP7□-X1□-KA
for the Kawasaki Heavy Industries, Ltd. duAro 1, 2 Series
Updated Aug-21
for Collaborative Robots ZXP7□-X1□-KA
for the Kawasaki Heavy Industries, Ltd. duAro 1, 2 Series
Updated Aug-21
- A compact, lightweight all-in-one vacuum gripper
- Integrated vacuum ejector, air supply/release valve, pressure switch, and cups
- Integrated vacuum ejector, pressure switch, and cups
- Standards: Conforming to ISO 9409-1-31.5-4-M5
- A wide variety of cup variations are available to support a wide range of workpieces.
Magnet Gripper
for Collaborative Robots
MHM-X7400A
for UNIVERSAL ROBOTS Updated May-21
for Collaborative Robots
MHM-X7400A
for UNIVERSAL ROBOTS Updated May-21
- Plug and Play configuration for immediate use
- URCap: Easy programming
- Attracts and holds heavy objects with a magnet
- Supports workpieces with holes and uneven surfaces
- Compact with high holding force
Holding force: Max. 200 N (ø25, Workpiece thickness 6 mm) - Continues to hold workpieces even when the air is shut off
- Operate by simply connecting 1 air supply tube and an electrical wiring M8 connector.
- Integrated solenoid valve, auto switch, and piston speed adjustment mechanism
Magnet Gripper
for Collaborative Robots
MHM-X7400A-HC10/HC10DT
for the YASKAWA Electric Corporation MOTOMAN-HC Updated May-21
for Collaborative Robots
MHM-X7400A-HC10/HC10DT
for the YASKAWA Electric Corporation MOTOMAN-HC Updated May-21
- Attracts and holds heavy objects with a magnet
- Supports workpieces with holes and uneven surfaces
- Compact with high holding force
Holding force: Max. 200 N (ø25, Workpiece thickness 6 mm) - Continues to hold workpieces even when the air is shut off
- Operate by simply connecting 1 air supply tube and
an electrical wiring M12connector. - Integrated solenoid valve, auto switch, and piston speed adjustment mechanism
Magnet Gripper
for Collaborative Robots
MHM-X7400A-CRX
for the FANUC CORPORATION CRX Series
Updated May-21
for Collaborative Robots
MHM-X7400A-CRX
for the FANUC CORPORATION CRX Series
Updated May-21
- Plug and Play configuration for immediate use
- FANUC CRX plug-in software
- Attracts and holds heavy objects with a magnet
- Supports workpieces with holes and uneven surfaces
- Compact with high holding force
Holding force: Max. 200 N (ø25, Workpiece thickness 6 mm) - Continues to hold workpieces even when the air is shut off
- Operate by simply connecting 1 air supply tube and
an electrical wiring M8connector. - Integrated solenoid valve, auto switch, and piston speed adjustment mechanism
Magnet Gripper
for Collaborative Robots
MHM-X7400A-ASSISTA
for the Mitsubishi Electric Corporation MELFA ASSISTA Series Updated May-21
for Collaborative Robots
MHM-X7400A-ASSISTA
for the Mitsubishi Electric Corporation MELFA ASSISTA Series Updated May-21
- Attracts and holds heavy objects with a magnet
- Supports workpieces with holes and uneven surfaces
- Compact with high holding force
Holding force: Max. 200 N (ø25, Workpiece thickness 6 mm) - Continues to hold workpieces even when the air is shut off
- Operate by simply connecting 1 air supply tube and
an electrical wiring M12connector. - Integrated solenoid valve, auto switch, and piston speed adjustment mechanism
Magnet Gripper
for Collaborative Robots
MHM-X7400A-TM
for the OMRON Corporation and TECHMAN ROBOT Inc. TM Series Updated May-21
for Collaborative Robots
MHM-X7400A-TM
for the OMRON Corporation and TECHMAN ROBOT Inc. TM Series Updated May-21
- Plug and Play configuration for immediate use
- TMComponent: Easy programming
- Attracts and holds heavy objects with a magnet
- Supports workpieces with holes and uneven surfaces
- Compact with high holding force
Holding force: Max. 200 N (ø25, Workpiece thickness 6 mm) - Continues to hold workpieces even when the air is shut off
- Operate by simply connecting 1 air supply tube and
an electrical wiring M8connector. - Integrated solenoid valve, auto switch, and piston speed adjustment mechanism
Vacuum Gripper Unit for Collaborative Robots
ZXP7□-X1□-ASSISTA for Mitsubishi Electric Corporation MELFA ASSISTA Updated May-21
ZXP7□-X1□-ASSISTA for Mitsubishi Electric Corporation MELFA ASSISTA Updated May-21
- Operate by simply connecting 1 compressed air supply tube and an electrical wiring M12 connector.
- Integrated vacuum ejector, air supply valve, pressure switch, and cups
- Features a rounded appearance without corners
- A wide variety of cup variations are available to support a wide range of workpieces.
Vacuum Gripper Unit for Collaborative Robots
ZXP7□11-X1□ for YASKAWA Electric Corporation collaborative robot MOTOMAN-HC10DT Updated May-21
ZXP7□11-X1□ for YASKAWA Electric Corporation collaborative robot MOTOMAN-HC10DT Updated May-21
- Can be operated simply by connecting 1 compressed air supply tube and the built-in cable for electric wiring
- Integrated vacuum ejector, air supply/release valve, pressure switch, and cups
- As the air piping and electric wiring built into the robot are used, no external wiring or piping is required.
No interference with workpieces or workers - Features a rounded appearance without corners
- A wide variety of cup variations are available to support a wide range of workpieces.
Vacuum Gripper Unit for Collaborative Robots
for the FANUC CORPORATION CRX Series
ZXP7□21-X1 Updated Apr-21
for the FANUC CORPORATION CRX Series
ZXP7□21-X1 Updated Apr-21
- Plug and Play configuration for immediate use
- FANUC CRX plug-in software
- Operate by simply connecting 1 compressed air supply tube and
an electrical wiring M8 connector. - Integrated vacuum ejector, air supply/release valve, pressure sensor, and cups
- Standards: Conforming to ISO 9409-1-50-4-M6
Body Ported Type/Box Type (Built-in Silencer)
ZH Series Updated Feb-21
ZH Series Updated Feb-21
- Nozzle sizes: ø1.5, ø1.8, and ø2.0 have been added to the box type.[New]
- Compact and lightweight
Overall length: Max. 11% reduction
Port height: Max. 25% reduction
Volume: Max. 39% reduction - 4 mounting types
- A silencer and standard bracket are available. (Body ported type only)
Vacuum Gripper Unit
for Collaborative Robots
ZXP7□01-X1 Updated Jul-20
for Collaborative Robots
ZXP7□01-X1 Updated Jul-20
- Plug & play configuration for immediate use
URCaps compatible Easy programming - Operate by simply connecting 1 compressed air supply
tube and an electrical wiring M8 connector. - Integrated vacuum ejector, air supply/release valve, pressure sensor, and cups
- Standards: Conforming to ISO9409-1-50-4-M6
Magnet Gripper
ø16, ø25, ø32, ø50
MHM Series Updated Jan-20
ø16, ø25, ø32, ø50
MHM Series Updated Jan-20
- Attracts and holds heavy objects with a magnet
- Holding force: Max. 1000 N (ø50, Workpiece thickness 6 mm)
- Transfers steel plates without a vacuum
- Holding force (Attraction force) can be adjusted
- Drop prevention: Holds workpieces even when air is shut off
Multistage Ejector
ZL112A Series Updated Sep-18
ZL112A Series Updated Sep-18
- Energy saving: Air consumption 10% reduction
- Weight Max. 60% reduction
ZL112A: 180 g ← Current model (ZL112): 450 g - 3 stage diffuser construction
Suction flow rate increased by 250% - 3 types of vacuum pressure sensors
- No tools are required! Maintenance labor can be reduced.
Vacuum Pad
ZP3P Series Updated Jun-17
ZP3P Series Updated Jun-17
- Good for film packaging applications where the shape of the workpiece changes easily from being lifted.
- Silicone rubber compliant with the FDA (USA Food and Drug Administration) 21CFR§177.2600 elution test is used.
- Blue colored pad
- Reduced leakage
- Reduction of wrinkles made on thin workpieces (film, vinyl, etc.) during adsorption