Solutions » Introduction to Industry-Specific Solutions » Production Facility Piping Equipment for Facilities »
“Deionized Water / Chemical Liquids” Line
- Energy Saving
- By Industry ⁄ Process
- Applications
Fluoropolymer Fittings Hyper Fittings LQ1
Fittings and Tubing » Fittings for Special Environments(Clean/Fluoropolymer)
-
・Material: New PFA
・Quadruple-seal construction
・The reducer method allows for tubing size changes without replacing the body
| Series | Max. operating pressure | Operating temperature |
|---|---|---|
| LQ1 | 1.0 MPa | 0 to 200℃ |
Fluoropolymer Fittings Hyper Fittings LQ3
Fittings and Tubing » Fittings for Special Environments(Clean/Fluoropolymer)
-
・Material: New PFA
・Triple-seal construction
・Easy installation
| Series | Max. operating pressure | Operating temperature |
|---|---|---|
| LQ3 | 1.0 MPa | Nut material PVDF：0 to 150℃ Nut material PFA：0 to 200℃ |
FEP Tubing (Fluoropolymer) TH/TIH
Chemical Liquid Valves/Fittings & Needle Valves/Tubing » Tubing
-
・Maximum operating pressure: 2.3 MPa (at 20°C)＊
・Food Sanitation Law compliant
・Compliant with the FDA’s (Food and Drug Administration)
§ 177.1550 dissolution test
・Operating temperature (fixed usage): Air, Inert gas: -65 to 200°C
Water: 0 to 100°C (No freezing)
＊This may vary according to size.
| Series | Tubing O.D. Metric size | Tubing O.D. Inch size | Color |
|---|---|---|---|
| TH/TIH | φ4, φ6, φ8, φ10, φ12 | φ1/8''，φ3/16''，φ1/4''，φ3/8''，φ1/2''，φ3/4'' | Translucent, Black, Red, Blue |
Fluoropolymer Tubing TL/TIL
Fittings and Tubing » Tubing(Fluoropolymer/Clean)
-
・Max. operating pressure: 1.0 MPa (at 20℃)
・Operating temperature (fixed usage): −65 to 260℃
Fluoropolymer Tubing (PFA) TLM/TILM
Fittings and Tubing » Tubing(Fluoropolymer/Clean)
-
・Operating temperature (fixed usage): Air, Inert gas: −65 to 260℃
Water: 0 to 100℃ (No freezing)
・Food Sanitation Law compliant
・Complies with the FDA (Food and Drug Administration)
§ 177.1550 dissolution test
| Series | Tubing O.D. Metric size | Tubing O.D. Inch size | Color |
|---|---|---|---|
| TLM/TILM | φ2，φ3，φ4，φ6，φ8，φ10 φ12，φ16，φ19，φ25 | φ1/8''，φ3/16''，φ1/4''，φ3/8'' φ1/2''，φ3/4''，φ1''，φ1 1/4'' | Translucent, Black, Red, Blue |
2-Layer Soft Fluoropolymer Tubing TQ
Process Valves » Valves for Water and Chemical Base Fluids
-
・Carries fluid such as solvent with a soft and abrasion resistant tube.
・2-layer structure
Outer layer: Special nylon resin
Inner layer: Special fluoropolymer
・Internal smoothness: Equivalent to Ra 0.02 μm
| Series | Tubing O.D. Metric size | Color | Fluid |
|---|---|---|---|
| TQ | φ4, φ6, φ8, φ10, φ12 | Translucent (Material color) | Air, Water, Inert gas, Solvent |
